COSWHEEL R6000 Dirt Electric Dirt Bike

Use the NFC card that comes with the vehicle by touching it to the screen to start the bike. You can also copy this card to an NFC-enabled phone and use it as the vehicle start key.

Press and hold the M key to shut down or touch the screen with the NFC card. If the bike is stationary, the display will automatically shut down.

Short press the up-shift arrow to increase the power mode and the down-shift arrow to decrease it. The instrument’s default output power ranges from 0 (off) to 3 (highest).

Do not step on the pedal and allow the vehicle to roll for 3–4 meters; this will activate the throttle mode, since in modes 1–2 the throttle does not work when you pedal.

While charging, the battery indicator light glows red; it turns green once the battery is fully charged.

Error code E02 indicates a brake failure.

Error code E04 indicates battery undervoltage.

Using modes 1–2 engages pedal-assist, which conserves battery by mixing your pedaling power with motor assistance and disables the throttle in these modes.

When you power on the bike, the display shows total mileage, current speed, remaining battery power, headlight status and current gear.

Yes, you can use an NFC-enabled mobile phone to copy the NFC card that comes with the vehicle and use it as your start key.