T102 Pro

Press the power button to turn on the scooter, then hold your NFC key near the smart central display to activate it.

If your key or NFC device is lost, the scooter cannot be started. HALO KNIGHT does not offer replacement keys or NFC devices separately, so you must replace the complete meter or switch assembly.

Set both front and rear 10-inch pneumatic road tires to a pressure of 3.45 bar (50 PSI).

Loosen the vertical bar buckle, press the yellow ball catch into the stem with your thumb to select the correct hole, then tighten the buckle until you feel resistance.

To unfold, loosen the folding lock, remove it from the slot, push the handlebar stem forward until it clicks, and reinsert the lock. To fold, lower the stem to its lowest height by loosening the vertical bar buckle and pressing the yellow ball catch, then turn the orange safety lock counterclockwise, pull out the black latch, fold the stem down, and hook the latch onto the rear footrest.

Perform a thorough inspection of all components, ensure the braking system operates correctly, verify the folding and safety locks are secure, and set tires to the recommended pressure.

Use dual-motor mode on long rides or when climbing slopes, and avoid frequent braking, riding against strong winds, carrying heavy loads, and riding with low tire pressure.

No, the scooter is not waterproof and water exposure may damage electronics, which is not covered under the warranty policy.

The maximum total payload is 265 lbs (120 kg).

Using the 52 V 3 A charger, the battery requires 5–7 hours for a full charge.

For assistance, email service@haloknights.com or visit the HALO KNIGHT Help Center at www.haloknights.com.