RS6 ULTRA

Quickly press the power/mode button three times in a row to enter the P-settings menu. Once the first parameter flashes, press the power button once to cycle through each option, and press again to advance or exit. The menu will automatically exit after 8 seconds of inactivity.

Enter the P-settings by pressing the power button three times, then cycle to P7 (speed limit setting). Once P7 is flashing, press the power button to set a value between 1–100%, with 100% allowing the full factory speed.

Both front and rear tires should be inflated to 30 PSI. Proper tire pressure reduces the risk of flats and prevents rim or motor damage.

Wear a certified helmet, closed-toe shoes, and gloves. Before each ride, check that the battery level is above 20%, inspect motor wires and cables for wear, test all lights and the horn, and squeeze both brake levers to confirm firm resistance.

1. Unscrew the folding knob and release the black safety pin. 2. Fold the stem down and latch the hook under the footplate. 3. To lock upright, release the hook, raise the stem, reinsert the safety pin, and screw the folding knob until snug and wobble-free.

If you see E-001, swap the front and rear motor heads and retest. If the error persists, replace the controller; if it disappears after swapping, the original motor assembly must be replaced.

The manufacturer claims 128.7 km (80 mi) of range per charge. Real-world range will vary with rider weight, speed, terrain, and temperature.

The RoadRunner Scooters RS6 ULTRA weighs 44.4 kg (98 lbs). It is heavier than the performance average of 27.99 kg.

The RoadRunner Scooters RS6 ULTRA is rated IP67, which indicates strong water resistance — suitable for rain riding.

The RoadRunner Scooters RS6 ULTRA comes with a 12-month (1 year) manufacturer warranty.